Storage box generator
Set the width, depth and height, add dividers, a snap-on lid or mounting ears, and download the STL. Any size from 20 to 250 mm.
About this part
Settings that work for this part
Functional, not pretty
0.2 mm layers, 4 perimeters, 25 % gyroid infill. Walls carry the load in a printed part far more than infill does, so add walls before you add infill.
Holes print undersized
Every hole is modelled at the size you set. Turn on hole horizontal expansion of +0.1 to +0.2 mm in your slicer, or drill them out.
Material
PLA is fine indoors. Anything in a hot car, near a heated bed or outdoors wants PETG or ASA. See the filament database.
Storage box FAQ
Will the lid fit?
The lid is modelled with a small gap on every side, and the exact gap is listed under "About this part". It prints as a separate piece next to the box.
What wall thickness should I use?
Pick a multiple of your line width. With a 0.4 mm nozzle, 1.2 or 1.6 mm suits light boxes, and 2 mm or more suits boxes that get knocked around.
How many compartments can I have?
Up to 6 dividers each way, so up to 49 compartments. The size of each one is shown under "About this part".
How big can it be?
Up to 250 × 250 × 200 mm. Check that it fits your bed before you print.
Make something else
Gridfinity generator
Bins with dividers, scoops, labels and magnets, plus baseplates, lids, tool holders and a drawer fitter.
Open generator
Grid organiser generator
A drawer tray with a grid of cells sized to what you store, with optional stacking feet.
Open generator
Cable clip generator
Screw-down clips for any cable or bundle from 2 to 40 mm, printed as a set.
Open generator